thermal fatigue वाक्य
उदाहरण वाक्य
मोबाइल
- Surface attack includes oxidation, hot corrosion, and thermal fatigue.
- Thermal stress weathering comprises two main types, thermal shock and thermal fatigue.
- Supertherm has good thermal fatigue resistance above 1800 �F ( 980 �C ).
- Military engine turbine blades experience two significant deformation stresses during normal service, thermal fatigue.
- Thermal fatigue is when surface cracks occur on the die due to a large number of cycles.
- This decreases thermal fatigue, facilitates metal flow, and helps control the cooling rate of the casting metal.
- Refractory bricks are typically replaced every five years, because thermal fatigue gradually introduces fissures that reduce the insulating strength.
- He had set up the High Temperature Demonstrator Unit ( HTDU ) in 1972 to investigate cooling of turbine blades and thermal fatigue.
- Further metallic components in the hot gas duct failed in September 1988, probably due to thermal fatigue induced by unexpected hot gas currents.
- The resistance to thermal fatigue of this material is higher, but the quantity of slag when compared to the alloy between tin and lead.
- For lower melting point metals the mold life is longer but thermal fatigue and erosion usually limit the life to 10, 000 to 120, 000 cycles.
- All the boulders in the stone runs are remnants of quartzites that were repeatedly ground down from repeated weathering, perhaps by a combination of frost action and thermal fatigue.
- Some of the effects of creep and thermal fatigue may be mitigated by integrating cooling systems into the device's design, reducing the peak temperature experienced by the metal.
- We can attribute advantages of the Bi In alloy, when compared to the traditional ones ( Sn Pb ), as bigger thermal fatigue resistance, and lower melting point.
- Also, when an interface between material will be subject to thermal fatigue, glass-ceramics can be adjusted to match the coefficient of the material they will be bonded to.
- Integrated circuits last longest if they're operated at a continuous temperature, to prevent cracking from thermal fatigue, and if they're operated at a low temperature, to prevent electromigration of the wires.
- And unlike two-phase flow, s s single-phase nature eliminates the necessity of a heat input for phase change that is required for the water to steam conversion, thereby also eliminating associated thermal fatigue and corrosion.
thermal fatigue sentences in Hindi. What are the example sentences for thermal fatigue? thermal fatigue English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.